favorite
favorite
hide
unhide
flag

Posted

print

(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New - $3,975

(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 1 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 2 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 3 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 4 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 5 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 6 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 7 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 8 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 9 thumbnail(6) Bilco D-50 Aluminum Roof Hatch, 9'5"x5'5" - Equipment Access - New 10 thumbnail
condition: new
make / manufacturer: BILCO
model name / number: D-50 Aluminum Roof Hatch

more ads by this user

Qty 6: Bilco D-50 Aluminum Roof Hatch - Equipment Access - New Surplus
- They will fit a 4’-10” x 8’-10” rough opening (provides a convenient way to install
or remove large pieces of equipment from a building).
- They have a hinged toggle clamp that automatically locks when the hatch is closed.
(Note: Unit cannot be opened from underside while toggle clamps are engaged)
- This feature along with the curb attachment to the structural has gotten a 78 PSF design rating
for uplift and engineering, so it meets the Florida Building Code minimum standards.
- This product may be installed on either a flat or sloping roof. When installed on a slope, the
hinge side must run parallel with the slope. Slope must not exceed 30 degrees.

Specifications:
- Frame is 11 Gauge Aluminum w/Capflashing (Corners Full Welded)
- Pintle Hinge
- Gasket (all around the cover)
- Cover is 11 Gauge Aluminum
- Cover Liner is 18 Gauge Aluminum
- Spring Lift Mechanism
- Curb Insulation - 1" Fiberboard
- Two Point Latch Enclosure (Same mat'l as cover)
- Inside & Outside Handles w/Padlock Hasps
- Arm Guide Bracket
- Cover Insulation - 1" Fiberglass
- Hold Open Arm w/Red Vinyl Grip
- Neoprene Gasket
- Guide Arm (If required)
- BILCLIP Flashing System
- Lock Strike
- CL-500-PA & CL-500-PAA Exterior Toggle Clamps
(2 Req'd, 1 @ Each End)
Shop Finish:
Cover: Mill Finish
Frame: Mill Finish
Hardware: Non-Corrosive Materials
(Unless Otherwise Specified)
=============================
Overall Dimensions: 9'-5"L x 5'-5"W
Curb: 12" High
Weight: 462 lbs. Each

NOTE: UNUSED NEW SURPLUS (2023)

Your Cost: $3,975.00/Each

post id: 7744195764

posted:

updated:

best of [?]

loading
reading
writing
saving
searching